The most common reasons cars fail the MOT are faults with lights and electrical equipment, suspension, tyres, brakes and visibility. In DVSA figures for April to June 2026, just over one in four initial tests in Great Britain failed on arrival. Many of these faults are easy to spot at home, so a few minutes of checks before the test can save you a fail and a return visit.

How many cars fail the MOT?

DVSA publishes regular figures on MOT test results. In the most recent published quarter, April to June 2026, 26.75% of 7,808,594 initial MOT tests failed on arrival. Once vehicles that passed after being repaired at the test station are taken into account, the final failure rate was 21.72%.

These figures cover test classes 3 and 4 together. That group includes cars, light vans and some other vehicles, so it is not a cars-only picture. A separate ranking for passenger cars alone, and a breakdown for July to September 2026, have not been confirmed from the published DVSA tables.

How the ranking works

Each percentage in the ranking below shows the share of all initial tests that had at least one failure item in that category. A single test can count in several categories at once. For example, a car with a broken brake light and a worn tyre would appear under both lamps and tyres. That is why the percentages add up to more than the overall failure rate.

If you are new to the test itself, our MOT guide explains what the MOT covers and how it works.

The five most common MOT failure categories

RankFailure categoryShare of initial testsWhat to check first
1Lamps, reflectors and electrical equipment9.98%All lights, lenses, headlamp aim
2Suspension8.21%Springs, shock absorbers, joints
3Tyres6.55%Tread depth, cuts, bulges, pressures
4Brakes5.83%Pulling, parking brake, ABS warning
5Visibility4.40%Wipers, screenwash, mirrors, windscreen damage

Source: DVSA, classes 3 and 4, April to June 2026.

1. Lamps, reflectors and electrical equipment (9.98%)

Lighting faults top the list, and they are also among the easiest to find yourself. Switch on the lights and walk around the car. Check:

  • dipped and main beam headlamps
  • sidelights
  • indicators and hazard warning lights
  • rear fog lights, where fitted
  • number plate lights, where fitted

Brake lights are harder to check alone, so ask someone to stand behind the car while you press the pedal. Look for cracked or damaged lenses too. If a light is not working, or the headlamp aim is wrong, have it fixed before the test.

If you have fitted LED bulbs, the rules changed recently. Since 14 October 2026, MOT testers in Great Britain must accept ECE-approved LED replacement bulbs in compatible halogen headlamps. The approval must cover that specific bulb and headlamp combination, and the manufacturer’s approval sticker must be permanently attached where the tester can see it. Our article on MOT headlight and bulb rules goes into more detail.

2. Suspension (8.21%)

Suspension problems are harder to see, but there are warning signs. If the car keeps bouncing after going over a bump, or the tyres are wearing unevenly, have a garage inspect the suspension before the MOT. Ask them to check the springs, shock absorbers and suspension joints for damage or wear.

3. Tyres (6.55%)

Tyres are checked closely at the MOT. Use a tread-depth gauge on every fitted tyre. For most cars, the minimum is 1.6 mm in the main tread grooves, across the central three-quarters of the tread and around the full circumference.

While you are down there, look for:

  • cuts in the sidewall or tread
  • bulges
  • exposed cords

Check the pressures against the manufacturer’s figures when the tyres are cold. If the tyre-pressure warning light stays on after you have corrected the pressures, have it investigated. Our article on MOT tyre rules covers the tyre checks in more depth.

Tip

Do your tyre and light checks a week or so before the test rather than the morning of it. That leaves time to book a replacement tyre or bulb if you find a problem, instead of driving to the test centre knowing the car is likely to fail.

4. Brakes (5.83%)

The MOT checks how well the brakes perform as well as the condition of the parts. Have a garage look at the car promptly if:

  • the car pulls to one side when you brake
  • the parking brake does not hold the car
  • the anti-lock braking system (ABS) shows a fault warning

An ABS warning that indicates a system malfunction is a major defect at the MOT. Brake faults are also a safety issue, so do not wait for the test to get them checked. See how the brakes are assessed in our MOT brake test explainer.

5. Visibility (4.40%)

Visibility failures cover your view of the road. Before the test:

  • top up the screenwash
  • test that the front washers work
  • replace wiper blades that leave the windscreen unclear
  • remove phone mounts or other objects that block the driver’s view
  • check the mirrors are present and in good condition

Damage to the windscreen should be assessed if it is in your view. DVSA’s test for glass damage is whether it significantly affects the driver’s view of the road.

A quick pre-MOT routine

Putting the five categories together, a short routine before your test covers the most common causes of failure:

  1. Walk around the car with all lights on, and get a helper for the brake lights.
  2. Measure the tread on every tyre and look for damage.
  3. Set the tyre pressures with the tyres cold.
  4. Top up screenwash and test the washers and wipers.
  5. Clear anything that blocks your view through the windscreen.
  6. Book a garage visit for any bouncing, uneven tyre wear, pulling under braking or warning lights.

For a fuller list, use our MOT pre-check checklist. If you are not sure when your test is due, the MOT due date calculator can help you plan ahead.

Recent and upcoming MOT changes

A few changes are worth knowing about, even if they do not alter the most common failure reasons.

Photos at MOT tests

A phased rollout of vehicle photos at MOT tests began in Great Britain on 3 August 2026. DVSA said more garages would get access in later phases. The photo provides evidence that the vehicle was present for its test.

Driver assistance systems and electric cars

DVSA’s 2026/27 business plan includes further testing of advanced driver assistance systems. It also includes a review of checks on electric vehicles, covering high-voltage systems and battery integrity. No date has been confirmed for any new pass or fail criteria in these areas, so nothing changes for drivers yet.

The bottom line

Most MOT failures come down to a handful of areas, and the biggest one, lighting, is something you can check yourself in a few minutes. Look after your tyres, keep your windscreen and wipers in good order, and get any suspension or brake symptoms checked early. That way you give your car the best chance of passing first time.

MOT due date calculator See when the first and next MOT are due, and how early you can test.
Try it free

Frequently asked questions

What is the most common reason for an MOT failure?

In DVSA figures for April to June 2026, lamps, reflectors and electrical equipment was the most common failure category. It appeared in 9.98% of initial MOT tests for classes 3 and 4, which include cars and light vans.

How many cars fail their MOT?

DVSA figures show that 26.75% of 7,808,594 initial MOT tests in Great Britain failed on arrival in April to June 2026. After allowing for vehicles that passed following repairs at the test station, the final failure rate was 21.72%.

What is the minimum tyre tread depth for the MOT?

For most cars the minimum is 1.6 mm in the main tread grooves. This applies across the central three-quarters of the tread and around the full circumference of the tyre.

Will LED replacement headlamp bulbs pass the MOT?

Since 14 October 2026, MOT testers in Great Britain must accept ECE-approved LED replacement bulbs in compatible halogen headlamps. The approval must cover the bulb and headlamp combination, and the approval sticker must be permanently attached where the tester can see it.

Can a windscreen chip cause an MOT fail?

It can. DVSA's test for glass damage is whether it significantly affects the driver's view of the road, so damage in the driver's line of sight should be assessed before the test.

Sources

PlateScout is independent and not affiliated with the DVLA, DVSA, TfL or any government body. Rules and rates change: always check the official source before you act.

Check a number plate now

See when and where a car was first registered, free and without signing up.

UK

Works for current, prefix and suffix plates.