A good used-car test drive starts before you turn the key. Make sure you are insured, that the car is taxed, has a valid MOT where one is needed and matches its V5C, then check it while parked, from a cold start and on the road. Anything that looks, feels or sounds wrong should be explained, or independently inspected, before you hand over any money.
Before you drive: the paperwork checks
A test drive is still driving on a public road, so the normal rules apply. Doing these checks first protects you if something goes wrong during the drive, and it also tells you a lot about the car and the seller.
Your licence and insurance
Your licence must cover the car you are about to drive, and you need at least third-party insurance for the test drive. If you are buying from a dealer, ask it to confirm that its policy covers you. For a private sale, check what your own policy allows, or arrange temporary car insurance before you set off. The Highway Code’s Annex 3 sets out the documents and insurance you need to drive.
Tax, MOT and trade plates
The car itself must be roadworthy, have a valid MOT if it needs one, and be taxed. The exception is a dealer using trade plates. Dealers can use trade plates for a prospective buyer’s test drive, but the vehicle must still be roadworthy and insured, and it must have a valid MOT or qualify for an exemption. If a private seller suggests a quick drive in an untaxed or uninsured car, it is better to wait until that is sorted.
Identity, MOT history and recalls
Match the registration and the vehicle identification number (VIN) on the car with the V5C log book. If they do not match, stop there and ask why.
Next, look at the MOT record. Check the expiry date, compare the odometer reading with the mileages recorded at past MOT tests, and ask the seller about any discrepancy or outstanding advisories. Our guide to reading MOT history explains what to look for line by line.
Finally, use the registration to look for outstanding safety recalls on the GOV.UK recall checker. If a stop-drive recall applies, skip the test drive until the required repair has been confirmed. There is more on how recalls work in our vehicle recall check guide.
Checks while the car is parked
You can learn a lot before the car moves at all, so take your time with this part rather than rushing to get on the road.
Tyres, glass and lights
Walk round the car and look at each tyre for cuts, bulges and uneven wear. For 2026/27, the legal minimum tread depth for cars in the UK is 1.6 mm across the central three-quarters of the tread, around the full circumference. Our article on MOT tyre rules covers this in more detail.
Check the windscreen for damage, and make sure the lights, wipers and washers all work. Ask the seller to stand outside while you test the lights, or check them against a wall or shop window.
Driving position and controls
Before moving off, adjust the seat, head restraint and mirrors, and fasten your seat belt. You should be able to see clearly and reach every control comfortably. Use this moment to try the heating, air conditioning, demisters and electric windows, because these are easy to forget once you are concentrating on the road.
Start the engine from cold
When you arrange the viewing, ask to start the engine from cold. It should start readily and settle to a steady idle. Watch for warning lights that stay on after start-up, listen for unusual knocking or rattling, and look behind the car for excessive exhaust smoke. Ask about anything you did not expect.
On the road
If you can, plan a route that includes a level stretch, some slow turns and an uneven surface, so you can test each of the points below.
Steering and suspension
Keep both hands on the wheel and notice whether the car pulls to one side on a level stretch, or whether the wheel vibrates. At low speed, listen for unusual noises as you turn. Over uneven surfaces, listen for clunks and feel for harsh jolts.
Brakes and parking brake
Where it is safe, brake progressively and pay attention to how the car behaves. Pulling to one side, judder through the steering wheel or pulsing through the pedal during ordinary braking are all worth asking about. Check that the parking brake engages and releases, and that it holds the car on a slope if there is a safe place to try it.
Acceleration, gears and clutch
The car should accelerate smoothly. In a manual, gears should select without crunching and the clutch should take up smoothly. Under acceleration, the engine revs should rise in step with road speed. If the revs climb but the car does not pick up speed to match, ask about it. In an automatic, gear changes should feel smooth.
Temperature gauge and dashboard
If the car has a temperature gauge, check that the reading settles once the engine has warmed up. Note any temperature warning or other warning light that appears during the drive, even if it goes out again.
Your test drive checklist at a glance
| Stage | What to check | Ask about |
|---|---|---|
| Before driving | Licence, insurance, tax, MOT, recalls, VIN and registration against the V5C | MOT mileage gaps or outstanding advisories |
| Parked | Tyres (1.6 mm minimum tread), windscreen, lights, wipers, washers, heating, air conditioning, windows | Cuts, bulges, uneven wear, glass damage |
| Cold start | Starts readily, settles to a steady idle | Warning lights staying on, knocking, rattling, excessive smoke |
| Steering and suspension | Pulling on a level road, wheel vibration | Noises when turning, clunks, harsh jolts |
| Brakes | Progressive braking, parking brake on a slope | Pulling, judder, pulsing through the pedal |
| Engine and gears | Smooth acceleration, clean gear changes, smooth clutch take-up | Crunching gears, revs rising faster than road speed |
| Dashboard | Temperature reading settles | Any warning that appears during the drive |
Extra checks for electric cars and plug-in hybrids
With an electric car or plug-in hybrid, inspect the charging socket and confirm which cables come with the car. Record the charge level and the displayed range when you start. Ask for any available battery-health information and check the warranty terms for that specific car rather than assuming they match another example of the same model.
Cold weather can reduce the displayed range, so treat the figure as an estimate for the conditions on the day. Our guide to buying a used electric car goes into battery checks in more depth.
After the drive
Once you are back, go through anything you noticed with the seller: warning lights, noises, or records that do not add up. If the cause is still unclear, arrange an independent pre-purchase inspection, with the seller’s permission, before you commit. You are under no obligation to buy just because you have driven the car.
Write down the mileage, the fuel or charge level and any warning lights both before and after the drive. Short notes make it much easier to raise questions with the seller, or with an inspector, afterwards.
For the rest of the buying process, from viewing to paperwork, see our buying a used car guide.
MOT changes to keep in mind for 2026/27
Two developments are worth knowing about if you are test driving a car this year.
In Northern Ireland, temporary MOT exemptions have been extended for 2026/27. The Driver and Vehicle Agency applies Temporary Exemption Certificates automatically to eligible five- and seven-year-old private cars when their current MOT expires. Check the status of the specific car you are looking at. Even with an exemption, it must still be roadworthy, taxed and insured for the test drive.
In Great Britain, the DVSA has announced a review of EV testing. Its 2026/27 business plan covers EV-specific MOT testing, including high-voltage systems and battery integrity. The start date and final requirements of any new MOT checks for passenger cars arising from that review have not been confirmed.
Frequently asked questions
Do I need insurance to test drive a used car?
Yes. You need at least third-party insurance for the test drive. Ask a dealer to confirm its policy covers you, and for a private sale check your own policy or arrange temporary cover before driving.
Can I test drive a car without tax or MOT?
The car must be taxed and have a valid MOT if it needs one, unless a dealer is using it lawfully on trade plates. Even on trade plates, the car must be roadworthy, insured and have a valid MOT or qualify for an exemption.
What is the minimum tyre tread depth in the UK?
For cars in 2026/27, the minimum tread depth is 1.6 mm across the central three-quarters of the tread, around the full circumference. On a test drive, also look for cuts, bulges and uneven wear.
Why should I start a used car from cold?
A cold start shows whether the engine starts readily and settles to a steady idle. Watch for warning lights that stay on after start-up, unusual knocking or rattling, and excessive exhaust smoke.
What should I check when test driving a used electric car?
Inspect the charging socket, confirm which cables come with the car and record the charge level and displayed range. Ask for any battery-health information, check the warranty terms for that car and remember that cold weather can reduce the displayed range.
Sources
- The Highway Code, Annex 3: motor vehicle documentation and learner driver requirements
- DVLA trade licence guidance notes (VTL301G)
- DVSA MOT testing guide
- GOV.UK: Check if a vehicle has been recalled
- The Highway Code, Annex 6: vehicle maintenance, safety and security
- RAC: buying a used car checklist
- Which?: how to buy the best used car
- Department for Infrastructure (Northern Ireland): extension of Temporary Exemption Certificates
PlateScout is independent and not affiliated with the DVLA, DVSA, TfL or any government body. Rules and rates change: always check the official source before you act.
Check a number plate now
See when and where a car was first registered, free and without signing up.