Yes, 3D gel, 4D acrylic and 4D gel number plates can be legal for UK road use, as long as the finished plate meets the British Standard and the display rules. Raised characters are allowed, but they must be permanently attached, non-reflective and a single shade of black, in the standard font, size and spacing. Get any of that wrong and the plate can fail its MOT and lead to a fine of up to £1,000.
What 3D and 4D plates actually are
“3D” and “4D” are sales terms, not legal categories. They describe plates where the characters stand proud of the backing instead of being printed flat on it. Gel and acrylic plates use different materials to create that raised effect, and suppliers market them under a range of names.
The important point is that the name on the packaging makes no difference to the law. A plate sold as “4D gel” has to meet exactly the same requirements as any other plate. What counts is how the finished plate looks and performs, not what the supplier calls it. For the wider picture on formats and what is allowed on a plate, see our number plates guide.
The standard your plate must meet
UK number plates are made to a British Standard. The current one is BS AU 145e, which applies to plates fitted from 1 September 2021. It covers plates on vehicles first registered from that date and new replacement plates fitted from that date to most older vehicles. The regulations also accept a recognised EEA specification that offers equivalent performance.
The 2021 change did not force anyone to replace compliant older plates. BS AU 145d was the standard for the previous regime, which ran from 1 September 2001 to 31 August 2021. A compliant plate fitted under that regime can stay on the car, but if you replace it today, the new plate must meet the newer specification.
| Plate fitted | Standard that applies | Do you need to change it? |
|---|---|---|
| 1 September 2001 to 31 August 2021 | BS AU 145d | No, if it was compliant when fitted |
| From 1 September 2021 | BS AU 145e or an equivalent EEA specification | Must meet the current standard |
| Replacement fitted now to an older car | BS AU 145e | Must meet the current standard |
The legal detail sits in the amending regulations laid on 30 November 2020.
What makes a raised plate road legal
A raised plate is only legal if every part of it complies. These are the points that matter.
The characters
The characters must be:
- permanently attached to the plate
- non-reflective
- a single shade of black across both the face and the sides
This is where many 3D and 4D plates go wrong. Grey shading, coloured or clear side layers and two-tone highlights all fall outside the current specification. A plate with black faces but tinted or see-through edges is therefore not compliant, however neat it looks.
The backing and markings
The background must be retroreflective. A standard car plate has black characters on white at the front and black characters on yellow at the rear. The plate must also carry:
- the standard identifier it was made to
- the name of the parts supplier or manufacturer
- the name and postcode of the outlet that supplied the assembled plate
Font, size and spacing
Raised characters follow the same font, size and spacing rules as flat ones. The figures below come from DVLA leaflet INF104 and apply to a standard modern car plate.
| Measurement | Requirement |
|---|---|
| Character height | 79 mm |
| Character width | 50 mm (except "1" and "I") |
| Stroke width | 14 mm |
| Gap between characters | 11 mm |
| Gap between the two groups | 33 mm |
A raised plate in a stylised font or with altered spacing breaks these rules in exactly the same way a flat one would.
Readable and photographable
The registration must stay readable by eye and capable of being accurately photographed. Treatments and fixings that impair readability or photography breach the display rules. BS AU 145e also specifies contrast for automatic number plate recognition (ANPR), the camera systems that read plates automatically.
Buy from a registered supplier
Plates for road use should come from a registered number plate supplier. The supplier must check original documents that establish your identity and your entitlement to use the registration. A seller who will post you raised plates without asking for any documents is a clear warning sign. Our article on number plate supplier rules explains what to bring.
If a seller describes a raised plate as a “show plate”, read our guide to whether show plates are legal before you fit it to a car you drive on the road.
Before you buy, ask the supplier to confirm that the plate is made to BS AU 145e, that the raised characters are a single shade of black on the face and the sides, and that the supplier name and postcode will be marked on the plate. If they cannot confirm all three, look elsewhere.
Raised plates and the MOT
Raised characters are permitted under the DVSA car MOT inspection criteria in Great Britain, so a plate will not fail simply for being 3D or 4D. It will fail if it has one of the problems the tester checks for. Each of these is a major defect and means an MOT failure:
- a missing or insecure plate
- a missing or illegible inscription
- an incorrect registration
- a plate that does not meet the inspection requirements
The full criteria are set out in the MOT inspection manual. For other faults that regularly catch drivers out, see our list of common MOT failure reasons.
Fines for illegal plates
An incorrectly displayed number plate can attract a fine of up to £1,000. That applies to a raised plate with tinted sides or the wrong font just as much as to any other non-compliant plate. Our article on number plate rules and fines covers the wider list of plate offences.
Changes that have been announced
A possible move to flat plates
The government is working on a flat-plate requirement. On 3 November 2026 it told Parliament that DVLA and the British Standards Institution had developed amendments that would require finished plates to be flat and prohibit raised or “ghost” characteristics.
The start date has not been confirmed, and neither has whether drivers would have to replace existing compliant raised plates. Until a change is made, a compliant 3D or 4D plate remains legal.
Tougher penalties
The government has also proposed penalty points and vehicle seizure for offences involving incorrect, altered or false plates. The consultation closed on 11 May 2026. On 9 November 2026 the government said it was analysing responses and that any changes would require legislation. The final penalties and any start date have not been confirmed.
The bottom line
A 3D or 4D gel plate is legal if it is made to BS AU 145e, has permanently attached, non-reflective raised characters in a single shade of black, uses the correct font and spacing, carries the required markings and comes from a registered supplier. Avoid tinted edges, two-tone effects and anything that makes the reg harder to read or photograph. Keep an eye on the planned flat-plate rule too, because it could change what you are allowed to fit the next time you replace a plate.
Frequently asked questions
Are 4D number plates legal in the UK?
Yes, 4D acrylic and 4D gel plates can be legal if the finished plate meets BS AU 145e and the display rules. The raised characters must be permanently attached, non-reflective and a single shade of black on the face and the sides.
Will 3D gel number plates fail an MOT?
Raised characters are permitted under the DVSA car MOT inspection criteria in Great Britain. A plate fails if it is missing or insecure, has a missing or illegible inscription, shows an incorrect registration or does not meet the inspection requirements.
What is the fine for illegal number plates?
An incorrectly displayed number plate can attract a fine of up to £1,000. Penalty points and vehicle seizure have been proposed for incorrect, altered or false plates, but the final penalties and any start date have not been confirmed.
Are raised number plates being banned?
On 3 November 2026 the government told Parliament that amendments had been developed to require flat plates and prohibit raised or ghost characters. The start date, and whether existing compliant raised plates would have to be replaced, have not been confirmed.
Do I need to replace plates fitted before September 2021?
No. The 2021 change did not require compliant older plates to be replaced. Any replacement plate you fit now must meet the newer BS AU 145e specification.
Sources
- DVLA: Vehicle registration numbers and number plates (INF104)
- The Road Vehicles (Display of Registration Marks) (Amendment) Regulations 2020
- The Road Vehicles (Display of Registration Marks) Regulations 2001
- DVSA MOT inspection manual: identification of the vehicle
- Department for Transport: crackdown on illegal number plates
- House of Lords written answers, 3 November 2026
- Department for Transport: proposed changes to penalties for motoring offences
PlateScout is independent and not affiliated with the DVLA, DVSA, TfL or any government body. Rules and rates change: always check the official source before you act.
Check a number plate now
See when and where a car was first registered, free and without signing up.