Glossary · Maintenance and repairs
Tread depth
Tread depth is the depth of the grooves in a tyre's tread, which channel water away and keep the tyre gripping the road.
The legal minimum tread depth for cars is 1.6 mm across the central three-quarters of the tread, around the whole circumference of the tyre. Driving on tyres below this limit is an offence and an MOT failure.
Grip in wet weather falls as tread wears, so many drivers replace tyres before they reach the legal limit. Check tread regularly with a tread depth gauge or by looking at the tread wear indicators moulded into the grooves.
Uneven wear, such as one edge wearing faster, can point to incorrect tyre pressures or poor wheel alignment. Have this checked when you replace tyres.
Related terms
- Tyre pressureTyre pressure is the amount of air inside a tyre, measured in psi or bar, and set by the car manufacturer for safe handling, braking and tyre wear.
- Part-worn tyresPart-worn tyres are second-hand tyres that have been used before and are resold, usually for less than the price of new tyres.
- MOT testThe MOT test is the yearly check that a vehicle meets minimum road safety and environmental standards, required for most cars from 3 years old in Great Britain.
- Wheel alignment (tracking)Wheel alignment, often called tracking, is the adjustment of a car's wheel angles so they point in the direction set by the manufacturer.