Glossary · Maintenance and repairs
Brake discs
Brake discs are metal rotors attached to the wheels that the brake pads clamp onto to slow and stop the car.
Also known as: brake rotors
Discs wear more slowly than pads but do need replacing. Each disc has a minimum thickness set by the manufacturer. Discs can also develop a lip on the edge, deep scoring or corrosion.
A juddering steering wheel or pulsing brake pedal when braking can point to warped or uneven discs. Cars that are rarely used, including many electric cars, may suffer from rusty discs because the brakes are used less.
Discs are inspected at the MOT and during servicing, and worn or corroded discs often appear as MOT advisories. They are normally replaced in pairs on the same axle, usually with new pads.
Related terms
- Brake padsBrake pads are friction blocks that press against the brake discs when you brake, slowing the car by turning movement into heat.
- MOT testThe MOT test is the yearly check that a vehicle meets minimum road safety and environmental standards, required for most cars from 3 years old in Great Britain.
- MOT advisoryAn MOT advisory is a note from the tester about an item that is not yet a defect but may need attention soon.
- Regenerative brakingRegenerative braking uses an electric or hybrid car's motor to slow the car down while turning the recovered energy back into electricity for the battery.